If you are trying to remove your YIP SMART TAG from one Galaxy phone and pair it with another Galaxy phone, see the following link for instructions. How to remove your YIP Smart Tag from your iPhone
How to factory reset your YIP Smart Tag - Samsung Galaxy Version
1. Using a quarter, remove the back cover.
2. Using your finger nail, pull back the battery tab and press on the battery at the 5 O'clock position. This will cause the top of the battery to release. Once the battery has been removed, wait 10 seconds.
3. With the tip of a pen or small screw driver, press down the reset button. While holding the reset button down, insert the battery. Keep the reset button held down for a few seconds, until you hear a tone. Then release the button.
4. The LED light should now be flashing, indicating the tag is in pairing mode. It will stay in pairing mode for 10 minutes. If 10 minutes has elapsed and you have not paired your tag with an iPhone, you can place the tag back into pairing mode by removing the battery, waiting 10 seconds, and reinserting the battery.
5. To pair your YIP Smart Tag to your Galaxy phone, refer to the following link for instructions.